There are four basic styles of hearing aids for people with sensorineural hearing loss:
- In-the-Ear (ITE) hearing aids fit completely in the outer ear and are used for mild to severe hearing loss. The case, which holds the components, is made of hard plastic. ITE aids can accommodate added technical mechanisms such as a telecoil, a small magnetic coil contained in the hearing aid that improves sound transmission during telephone calls. ITE aids can be damaged by earwax and ear drainage, and their small size can cause adjustment problems and feedback. They are not usually worn by children because the casings need to be replaced as the ear grows.
- Behind-the-Ear (BTE) hearing aids are worn behind the ear and are connected to a plastic earmold that fits inside the outer ear. The components are held in a case behind the ear. Sound travels through the earmold into the ear. BTE aids are used by people of all ages for mild to profound hearing loss. Poorly fitting BTE earmolds may cause feedback, a whistle sound caused by the fit of the hearing aid or by buildup of earwax or fluid.
- Canal Aids fit into the ear canal and are available in two sizes. The In-the-Canal (ITC) hearing aid is customized to fit the size and shape of the ear canal and is used for mild or moderately severe hearing loss. A Completely-in-Canal (CIC) hearing aid is largely concealed in the ear canal and is used for mild to moderately severe hearing loss. Because of their small size, canal aids may be difficult for the user to adjust and remove, and may not be able to hold additional devices, such as a telecoil. Canal aids can also be damaged by earwax and ear drainage. They are not typically recommended for children.
- Body Aids are used by people with profound hearing loss. The aid is attached to a belt or a pocket and connected to the ear by a wire. Because of its large size, it is able to incorporate many signal processing options, but it is usually used only when other types of aids cannot be used.
Do All Hearing Aids Work the Same Way?
The inside mechanisms of hearing aids vary among devices, even if they are the same style. Three types of circuitry, or electronics, are used:
- Analog/Adjustable: The audiologist determines the volume and other specifications you need in your hearing aid, and then a laboratory builds the aid to meet those specifications. The audiologist retains some flexibility to make adjustments. This type of circuitry is generally the least expensive.
- Analog/Programmable: The audiologist uses a computer to program your hearing aid. The circuitry of analog/programmable hearing aids will accommodate more than one program or setting. If the aid is equipped with a remote control device, the wearer can change the program to accommodate a given listening environment. Analog/programmable circuitry can be used in all types of hearing aids.
- Digital/Programmable: The audiologist programs the hearing aid with a computer and can adjust the sound quality and response time on an individual basis. Digital hearing aids use a microphone, receiver, battery, and computer chip. Digital circuitry provides the most flexibility for the audiologist to make adjustments for the hearing aid. Digital circuitry can be used in all types of hearing aids and is typically the most expensive.
What Can I Expect From My Hearing Aids?
Using hearing aids successfully takes time and patience. Hearing aids will not restore normal hearing or eliminate background noise. Adjusting to a hearing aid is a gradual process that involves learning to listen in a variety of environments and becoming accustomed to hearing different sounds. Try to become familiar with hearing aids under nonstressful circumstances a few hours at a time. Programs are available to help users master new listening techniques and develop skills to manage hearing loss. Contact your audiologist for further information about programs that may suit your individual needs.
